Product code: ECK-SCP-005pressed sheet panel steel door
Malakit Green Geometric-Relief Pressed Sheet Panel Steel Door
Malakit is the most distinctive model in the range for colour alone, finished in dark green with an interlocking square relief. It's used as an apartment door and just as readily on a detached house entrance.
- Colour
- Yeşil
- Surface finish
- Sac panel
- Surface texture
- Kabartma
- Door leaf
- Single leaf
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The pattern builds a vertical line down the centre of the leaf, with interlocking squares and rectangles running from top to bottom. The relief is shallow, so from a distance it reads simply as texture and only resolves into a geometric drawing up close. The dark green supports that reading; the same relief on a pale colour would look far busier.
The handle is a vertical chrome bar, set to the left of the pattern at the leaf's mid-height, and the leaf itself is unglazed. Dark colours run warmer on an exterior door facing direct sun, and that's something we raise upfront for any entrance that opens straight onto the outside.
- Dark green surface
- Interlocking square relief pattern
- Vertical chrome bar handle
- Round viewer
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-SCP-005 |
| Colour | Yeşil |
| Surface finish | Sac panel |
| Surface texture | Kabartma |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Gözetleme deliği, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
Why does the relief on Malakit read differently up close than from a distance?
The relief is shallow, so from across a hallway it simply looks like texture; only on approach does it resolve into the interlocking squares and rectangles that make up the actual pattern. The dark green ground supports that effect, since the same relief on a pale colour would look considerably busier.
Can Malakit be built to a non-standard opening?
Yes. The dark green surface and the interlocking square relief are resized together against your own door opening rather than stretched on their own, so the geometric pattern keeps reading correctly at any size. Measure the opening from inside the frame and we check it again on site before the leaf is made.
Is Malakit suitable for an apartment door as well as a house entrance?
Yes, it's used as both. The body, insulation and lock hardware are the same as the rest of the pressed sheet panel range; the dark green tone and the geometric relief are what make this particular model recognisable, whichever kind of entrance it ends up on.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.