Product code: ECK-SCP-007pressed sheet panel steel door
Zerefşan White Pressed Sheet Panel Steel Door with a Radiating Relief
Zerefşan carries a large central panel with a relief that radiates outward from a single point, surrounded by a diamond-textured ground; the whole surface is white.
- Colour
- Beyaz
- Surface finish
- Sac panel
- Surface texture
- Kabartma
- Door leaf
- Single leaf
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The pattern is directional: the rays spread from a focal point and thin out as they reach the edge of the panel. On a white surface this relief shows up through shadow alone, so the door changes appearance with the direction the light is coming from through the day; morning and evening read differently.
The vertical chrome handle sits to the left of the pattern and doesn't interrupt the symmetry of the rays. Marks around a handle show up more on white than on a darker tone, and wiping that area regularly keeps the surface looking right over the long term.
The ray pattern on white reads best under artificial light. With an overhead fixture on the landing, the pattern stays visible through the day; on an entrance that gets daylight only, it fades from view as the evening sets in.
For that reason, we suggest a deeper-relief model instead on a landing with no fixed lighting of its own.
- White surface
- Relief radiating outward from the centre
- Diamond-textured surround
- Vertical chrome bar handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-SCP-007 |
| Colour | Beyaz |
| Surface finish | Sac panel |
| Surface texture | Kabartma |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
Does the pattern on Zerefşan look the same throughout the day?
No. Because the relief is shallow and shows up through shadow rather than colour contrast, the way it reads shifts with the direction of the light, so morning and evening give a slightly different impression of the same door. On a landing with no fixed lighting, that shift is more noticeable.
Is Zerefşan available for a different door-opening size?
Yes, Zerefşan is produced against your own opening rather than from a fixed template, and the ray pattern radiating from the centre is redrawn so it still reads as centred on the leaf whatever width or height results. Send the opening measured from inside the frame, and we confirm it again on site before manufacture.
Do marks show more easily on a white door like Zerefşan?
Marks around the handle show up more readily on white than on a darker surface, simply because there's less tone to hide them in. Wiping that area regularly is enough to keep the rest of the panel looking as clean as the day it was fitted.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.