Product code: ECK-SCP-009pressed sheet panel steel door
Kartuş Baroque-Relief Pressed Sheet Panel Steel Door
Kartuş is the most ornate model in the range: an oval medallion relief sits at the top, a crest-shaped panel in the middle, and a diamond-textured square at the bottom. The ground itself carries the same diamond texture, so almost no part of the leaf is left plain.
- Surface finish
- Sac panel
- Surface texture
- Kabartma
- Hardware
- Bar kulp, Mermer eşik, Krom detay
- Door frame inner size
- 90 x 200 cm
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
That density is a matter of taste. In a hallway furnished in a classical style, the door speaks the same language as the rest of the decor; in a plainly furnished flat, it stands out on its own instead. We don't suggest this model without having seen the hallway first.
The dark brown tone deepens the shadow across the reliefs, and the pattern reads even from a distance. The handle is a vertical chrome bar, deliberately kept slim beside all that ornament; a heavier handle would have weighed the composition down.
The baroque relief is the deepest worked into any model in the range, and the leaf's weight goes up accordingly. The hinge count is set above the standard for that reason, and we say so at the measurement stage before anything is costed.
- Dark brown surface
- Oval medallion relief
- Crest-shaped centre panel
- Diamond-textured ground and lower square
- Vertical chrome bar handle
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-SCP-009 |
| Surface finish | Sac panel |
| Surface texture | Kabartma |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
Why is Kartuş considered the most ornate model in the range?
Almost no part of the leaf is left plain: an oval medallion sits at the top, a crest-shaped panel in the middle, a diamond-textured square at the bottom, and the ground between them carries the same texture throughout. The dark brown tone deepens every shadow, so the whole composition reads clearly even from a distance.
Is Kartuş made to the size of my own opening?
Yes, Kartuş is produced against your own door opening rather than from a stock run, and the oval medallion, the crest-shaped centre panel and the diamond-textured ground are all re-proportioned together so the composition stays balanced at any size. The extra hinge count is set once we've confirmed your measurement on site, not beforehand.
Does Kartuş suit every kind of entrance?
It suits a hallway furnished in a classical style particularly well, where the door speaks the same language as the decor around it; in a plainly furnished flat it tends to stand out on its own instead. We'd rather see the hallway first than suggest this model from a catalogue alone.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.