Product code: ECK-PVT-004pivot door
Sarkaç Plain-Surface Red Pivot Door
Sarkaç carries no pattern at all; the effect rests entirely on colour. A plain matt lacquer in a terracotta red works against the timber-clad frontage above it and the grey ground below.
- Colour
- Kırmızı
- Surface finish
- Lake
- Hardware
- Bar kulp
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
An entrance like this earns its keep on a quiet facade, standing as the single point of emphasis. The difficulty with a plain surface sits in manufacture: the smallest ripple shows on a single-colour leaf in a way it never would under a pattern.
For that reason the internal bracing on this leaf is denser than usual, aimed at stopping the leaf from bowing over time. An under-braced wide leaf bows slightly within a few years and stops seating evenly against the frame all the way round when it closes.
The colour itself sits outside the catalogue; any tone can be matched to it. On an exterior installation we use an exterior-grade lacquer system, and the fittings are finished in stainless.
- Plain matt lacquer surface
- Out-of-catalogue colour option
- Slim vertical bar handle
- Unglazed leaf
- Exterior-grade lacquer system
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVT-004 |
| Colour | Kırmızı |
| Surface finish | Lake |
| Hardware | Bar kulp |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
This model is made to the measurement of your door opening, not to a stock size. Measure the width and the height from inside the door frame and send them over; write down the wall thickness as well.
Frequently asked about this model
What kind of door is the Sarkaç model?
Sarkaç has no surface pattern; the whole effect is carried by colour alone, in this case a plain matt terracotta red set against a timber-clad frontage. It suits a quiet facade that wants one clear point of emphasis rather than a busy entrance.
Can Sarkaç be built to a non-standard opening?
Yes, Sarkaç is a made-to-order leaf rather than a stocked size, and the plain lacquered surface carries its colour evenly whatever width or height the opening calls for. Because there is no pattern to realign, resizing this model is more straightforward than on a patterned leaf, though we still confirm the opening on site and specify the spindle to suit the result.
Can the Sarkaç door be ordered in a colour outside the catalogue?
Yes, the colour on this model already sits outside the standard catalogue range, so matching a specific tone you already have is the normal process rather than an exception. We use an exterior-grade lacquer system on any outward-facing installation, with stainless fittings to match.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.