Product code: ECK-SCP-001pressed sheet panel steel door
Çatma Diamond-Textured Pressed Sheet Panel Steel Door
Çatma is pressed from a single steel panel and made for an ordinary apartment door, fitted where a standard flat opens off a building entrance. The whole leaf is anthracite grey, worked with a diamond-textured ground, and three relief panels sit over that texture.
- Surface finish
- Sac panel
- Surface texture
- Kabartma
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The texture does visible work: light breaks off it differently than it would off a flat leaf, which helps hide the fine scratches that build up in daily use. The square panel at the top sits above eye level, the horizontal strip in the middle lands at handle height, and the rectangular panel at the bottom covers the area that takes the hardest knocks.
The handle is a vertical chrome bar, placed where the hand naturally falls when pulling the door open. The round viewer sits in the upper section, close to the leaf's own tone. The leaf is unglazed, so no light passes between the landing and the flat, the arrangement most people choose for sound and privacy.
- Diamond-textured pressed ground
- Three-part relief panel layout
- Vertical chrome bar handle
- Round viewer
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-SCP-001 |
| Surface finish | Sac panel |
| Surface texture | Kabartma |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Gözetleme deliği, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What does the diamond texture on Çatma actually do?
It changes how light breaks across the leaf compared with a flat panel, and that difference in reflection helps hide the fine scratches that build up on a door used every day. Three relief panels sit over the textured ground: a square one above eye level, a strip at handle height, and a wider panel at the bottom that takes the hardest knocks.
Is Çatma suitable for a standard flat?
Yes, it's sized for exactly that: an ordinary apartment door fitted where a flat opens off a building's entrance. The leaf is unglazed, so no light or sightline passes between the landing and the flat, which is the layout most residents prefer for privacy and sound.
Can Çatma be made to a different door opening?
Yes. The diamond texture, the three-panel relief and the handle and viewer positions stay as designed; the leaf and door frame are resized to your opening and the panels are repositioned in the same proportions. We take the final measurement on site before manufacture begins.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.