Product code: ECK-SCP-002pressed sheet panel steel door
Sırça White Pressed Sheet Panel Steel Door with Glazing
Sırça is a white door carrying a small pane of glass in its upper section, suited to a detached house entrance or a flat whose landing stays dark. The glass is divided by wrought-iron bars and sits in the top third of the leaf.
- Colour
- Beyaz
- Surface finish
- Sac panel
- Surface texture
- Kabartma
- Glazing
- Yes
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The glass isn't placed there by accident: set above eye level, it doesn't show the inside of the hallway, but it does carry light from the landing through to the entrance. The wrought-iron bars stand in front of the glass as a physical barrier, not a security measure on their own, but enough to make reaching through harder if the glass were ever broken.
Black is used for the handle, the pull and the hinge fittings against the white surface, and two relief panels below set the leaf's classic proportions. White shows dirt more readily than a darker tone, and we say so plainly at the survey, because how often the landing gets cleaned has a direct bearing on whether this is the right choice.
- Wrought-iron-barred glazing in the upper section
- Two relief panels
- Black horizontal handle
- Black pull and hinge fittings
- White surface
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-SCP-002 |
| Colour | Beyaz |
| Surface finish | Sac panel |
| Surface texture | Kabartma |
| Glazing | Yes |
| Hardware | Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
Does the glass on Sırça let people see into the hallway?
No. It sits above eye level in the upper third of the leaf, which is high enough that it doesn't show the inside, but it still carries light from the landing through to the hallway. The wrought-iron bars in front of it add a physical layer, though they aren't a security measure on their own.
Can Sırça be built to a different door-opening size?
Yes. The upper glazing, its wrought-iron bars and the two relief panels below are all resized together for your own opening, since stretching the glazing without adjusting the panels would throw the proportions off. Send the width and height measured inside the frame, and we confirm them again on site before manufacture.
Where does Sırça usually get fitted?
Mostly at detached house entrances and on flats whose landing doesn't get much natural light, since the glass brings some of that landing light through. The body, insulation and lock hardware are the same as the rest of the pressed sheet panel range; the glazing and the white tone are what set it apart.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.