Product code: ECK-SCP-004pressed sheet panel steel door
Zencerek Square-Paned Pressed Sheet Panel Steel Door
Zencerek carries glass divided into square panes in the upper section, framed in white against the rest of the leaf, which stays anthracite grey. It's used on villa and detached house entrances that want light in the hallway without showing what's behind the door.
- Colour
- Antrasit
- Surface finish
- Sac panel
- Surface texture
- Kabartma
- Glazing
- Yes
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The square panes break the glass into small sections, and the visible effect is that someone looking from outside sees a fragmented image rather than a clear one. The white frame, in turn, makes the edge of the glass stand out against the anthracite ground, so the leaf doesn't read as one plain grey mass.
The handle is horizontal, classic in shape, set at the leaf's mid-height. Below it sit two relief panels, a square one above a wider, horizontal one, which keeps the leaf's visual weight low.
The number of panes in the square glazing scales with the width of the leaf: the wider the door, the more panes there are, with the proportion held rather than the panes themselves being enlarged. That detail is what keeps the same model looking consistent across different door openings.
- Square-paned glazing in the upper section
- White glazing frame
- Two relief panels
- Classic horizontal handle
- Anthracite-grey surface
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-SCP-004 |
| Colour | Antrasit |
| Surface finish | Sac panel |
| Surface texture | Kabartma |
| Glazing | Yes |
| Hardware | Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
Can someone see through the glass on Zencerek from outside?
Only a broken-up view. The square panes split the glass into small sections, so a person on the landing sees a fragmented image rather than a clear one through to the hallway, enough to let light through without giving away what's behind the door.
Why is the glazing frame on Zencerek white rather than anthracite?
The white frame marks the edge of the glass clearly against the anthracite ground, so the leaf doesn't read as one flat grey surface. On a frame finished in the same anthracite tone, that boundary would soften and the glazed section would blend into the rest of the door.
Does the pane pattern on Zencerek change with the door size?
Yes. The number of square panes increases as the leaf gets wider, while the proportion of each pane to the next stays fixed rather than the panes simply growing larger. We check that width again on site before the panes are cut, which is how the pattern keeps looking right whatever width your opening needs.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.