Product code: ECK-SCP-003pressed sheet panel steel door
Somaki Gloss Red Pressed Sheet Panel Steel Door with Glazing
Somaki is the most eye-catching model in the range, finished in gloss red and asked for on detached house and shop entrances where the facade is seen from the street. A pane of wrought-iron-barred glass sits in the upper section, with a single relief panel below it.
- Colour
- Kırmızı
- Surface finish
- Sac panel
- Surface texture
- Kabartma
- Glazing
- Yes
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
The gloss surface cuts both ways. Seen from outside, the colour reads rich and the door is noticed from the street; against that, fingermarks and dust show up sooner than they would on a matt finish. How well a gloss red surface holds its tone in the sun over the years comes down directly to the quality of the paint.
The glazing bars are black, and the handle, pull and hinge fittings are chosen in the same tone, so the red surface stands alone and the fittings don't compete with it.
A gloss red surface is hard to touch up: even a small scratch shows against the surrounding shine, which is why we apply extra protection during installation on a red leaf.
- Gloss red surface
- Wrought-iron-barred glazing in the upper section
- Relief panel below
- Black horizontal handle
- Black pull
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-SCP-003 |
| Colour | Kırmızı |
| Surface finish | Sac panel |
| Surface texture | Kabartma |
| Glazing | Yes |
| Hardware | Mermer eşik |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
Does the gloss finish on Somaki show marks more easily?
Yes. A gloss surface reflects well and reads as a richer colour from the street, but fingermarks and dust show up on it sooner than they would on a matt finish. We apply extra protection during installation to a red leaf for that reason, and a damp cloth deals with day-to-day marks.
Is Somaki made to the size of my own door opening?
Yes, Somaki is produced against your own opening rather than from a stock run, and the gloss red surface, the glazing above and the relief panel below keep the same proportions whatever size results. We take the measurement on site and apply extra protection to the gloss surface during installation.
Where does Somaki tend to be chosen?
Mainly on detached house and shop entrances where the facade faces the street, since the gloss red is meant to be seen and noticed. The body, insulation and lock hardware follow the same build as every pressed sheet panel model; the colour and the glazing are what make this one distinct.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.