Product code: ECK-PVC-018PVC embossed steel door
Nevruz Curved Wood-Form PVC Steel Door
Nevruz lays a curved wood-toned form across almost the whole leaf on an anthracite ground, with the edges of the form rolling inward and outward in turn.
- Colour
- Ahşap tonu
- Surface finish
- PVC
- Door leaf
- Single leaf
- Glazing
- No
You do not need to type the code, we see it when you arrive from the link. We send the measurement and the delivery time in writing.
On-site measurement
The frame opening and the swing direction are settled at your address.
Manufacture and installation
Manufacture to your measurement, removal of the old door and installation in one run.
Checked after installation
Lock and hinge adjustment are checked once the door is in.
What this model has
It is the only model in the line built entirely from curves. The rest of the range works in straight or angled lines; here no edge is straight, and the composition reads more like a drawn line than a geometric layout.
A thin gap splits the form into two parts. Left as one solid piece, the wood area would look wide and heavy; the gap lightens it.
The horizontal lines on the ground continue underneath the curve. Where they cross the curved edge, the boundary of the form stands out and the wood area reads as sitting on the ground rather than floating above it.
The wood tone of the curved form can be changed. A darker timber pulls the form closer to the ground colour and quietens the effect; a lighter one brings it forward. The catalogue sample is shown in a light tone.
- Anthracite horizontal-line ground
- Large curved wood-toned form
- Thin gap dividing the form
- Chrome vertical bar handle
- Unglazed single leaf
- Marble threshold
Attributes
| Item | Value |
|---|---|
| Product code | ECK-PVC-018 |
| Colour | Ahşap tonu |
| Surface finish | PVC |
| Door leaf | Single leaf |
| Glazing | No |
| Hardware | Bar kulp, Mermer eşik, Krom detay |
| Door frame inner size | 90 x 200 cm |
| Architrave outer size | 108 x 210 cm |
| Item | Value |
|---|---|
| Steel body | 2 mm Ereğli A1 steel |
| Insulation core | 150 kg/m³ rock wool |
| Lock system | Kale 256G, 14-point |
| Certification | TSE EN 1627 |
The values below are the same across every model in the catalogue. What separates the models is the surface design, the finish and the way the door leaf is built.
Every model carries a warranty as standard. On upper-tier models an extended warranty applies, depending on the material chosen.
Measurements
Inside the door frame (the door opening): 90 x 200 cm · Architrave edge (outside the door frame): 108 x 210 cm. If your door opening falls outside these measurements, the same model is made to your size.
Frequently asked about this model
What makes the Nevruz door different from the rest of the PVC-embossed line?
Nevruz is the only fully curved model in the PVC-embossed line: a wood-toned form rolls inward and outward across almost the whole leaf, where the rest of the range is built from straight or angled lines. A thin gap splits the form into two parts so the shape reads as light rather than heavy.
Can the curved form be scaled to a wider or narrower door?
Yes, the leaf is worked out from your own door opening and the curve is redrawn at the new scale rather than stretched, because an uneven stretch would throw the inward and outward rolls out of proportion with each other. Give us the opening measured from inside the frame and we confirm it again on site before the leaf is made.
Where does the Nevruz door fit in the catalogue?
Nevruz belongs to the PVC-embossed steel door group, carrying a wood-toned surface over a PVC facing, an unglazed single leaf and a bar handle. These elements stay constant throughout the range; it is the shape of the surface pattern that sets each model apart, and here the pattern is the only fully curved one on offer.
Districts we install in
The catalogue is independent of area; for installation and service, move to the page for your own district.